Site Logo E-PROJECTTOPICS

DEVELOPMENT OF A PILOT ALLOCATION PROTOCOL TO MITIGATE THE EFFECT OF PILOT CONTAMINATION IN MASSIVE MULTIPLE INPUT MULTIPLE OUTPUT SYSTEM


📝


Presented To


Engineering Department

📄 Pages: 100       🧠 Words: 12902       📚 Chapters: 5 🗂️️ For: PROJECT

👁️‍🗨️️️ Views: 477      

⬇️ Download (Complete Report) Now!

ABSTRACT
Pilot Contamination (PC) has been considered as a majorlimiting factor of Time Division Duplexing (TDD) Massive Multiple-Input Multiple-Output (M-MIMO) systems, as itsaturates the signal to interference plus noise ratio (SINR) saturated. Similarly, several mitigation techniques such as Eigenvalue decomposition, cooperative Bayesian channel estimation, blind equalization technique, time staggering pilot, smart pilot assignment, etc. proposed in literature to address PC issue have limitations. These proposed methods are either based on initializing all pilot sequences allocated for training as requested by users or require coordination among neighboring cells. Either process is found to be difficult as synchronizing different levels of the network (micro, nano, and pico-cells) and possibly many cells is not only difficult but a huge task of highly computational complexity that requires coordination among neighboring cells. Therefore, this research work developed a Pilot Allocation Protocol (PAP) decontamination technique. The developed scheme was based on sectional pilot sequence initialization and sharing which allocate more than one user to share the same orthogonal pilot sequence within a cell. As a result of the sharing, intra cell interference was created, which in turn suppresses inter cell interference between users sharing the same pilot sequence and mitigate the effect of PC. Simulation was carried out using MATLAB 2016Rb and the performance of the developed PAP technique was then compared with conventional; and; Soft Pilot Reuse and Multi-Cell Block Diagonalization (SPR and MBD) schemes utilizing average Uplink (UL) and Downlink (DL) cell throughputs, and Bit Error Rate (BER) as performance metrics. Results obtained showed that, PAP technique had a better average UL and DL cell throughputs over the conventional; and; SPR and MBD schemes with an improvement of 2 b/s/Hz and 3b/s/Hz when the number of BS antennas considered was set at 64, 20.5 b/s/Hz for uplink and 20.3 b/s/Hz for ix

PLEASE NOTE

This material is a comprehensive and well-written project, structured into Chapter (1 to 5) for clarity and depth.


To access the full material click the download button below


OR


Contact our support team via Call/WhatsApp: 09019904113 for further inquiries.

Thank you for choosing us!

📄 Pages: 100       🧠 Words: 12902       📚 Chapters: 5 🗂️️ For: PROJECT

👁️‍🗨️️️ Views: 477      

⬇️ Download (Complete Report) Now!

🔗 Related Topics

DYNAMIC MODEL DEVELOPMENT AND RECEDING HORIZON CONTROL OF BLOOD GLUCOSE CONCENTRATION Development of an Optimal Reconfiguration Algorithm for Radial Distribution Electrical Power Networks ESTIMATION OF DETECTION THRESHOLD FOR SPECTRUM SENSING IN COGNITIVE RADIO USING ADAPTIVE NEUROFUZZY INFERENCE SYSTEM AND MONTE CARLO TECHNIQUES DEVELOPMENT OF BAOBAB/SISAL REINFORCED LOW DENSITY POLYETHYLENE HYBRID COMPOSITE DEVELOPMENT OF DEFICIT IRRIGATION SCHEDULLING STRATEGIES FOR MAIZE CROP UNDER GRAVITY-DRIP IRRIGATION SYSTEM DEVELOPMENT OF A DEEP LEARNING BASED VEHICLE LICENSE PLATE DETECTION SCHEME DEVELOPMENT OF ENVIRONMENTALLY FRIENDLY BIODEGRADABLE CUTTING FLUID FROM SOYA BEANS (GLYCINE MAX) THE EFFECT OF PERIWINKLE SHELL ASH AND DUST ON THE COMPRESSIVE STRENGTH OF CONCRETE THE EFFECTS OF WELDING AND HEAT TREATMENT ON MECHANICAL PROPERTIES OF DUPLEX STAINLESS STEELS DEVELOPMENT OF A TRAFFIC LIGHT CONTROLLER MODEL USING ARTIFICIAL BEE COLONY BASED ADAPTIVE DYNAMIC SCHEDULING ALGORITHM DEVELOPMENT OF METAL MATRIX/COCONUT SHELL ASH PARTICULATE COMPOSITES FOR AUTOMOTIVE APPLICATION EFFECTS OF SOME BITUMEN COATING TREATMENTS ON THE CORROSION AND MECHANICAL BEHAVIOUR OF LOW CARBON STEEL DEVELOPMENT AND CHARACTERIZATION OF GLASS CERAMIC FROM COCA-COLA GLASS BOTTLE AND MAGNESITE DEVELOPMENT OF AN IMPROVED INTEGRATED ROUTING PROTOCOL FOR OPPORTUNISTIC NETWORK WITH CONGESTION CONTROL USING PRE-EMPTIVE DATA EVICTION MODELING, SIMULATION AND STABILIZATION OF A DOUBLE QUAD INVERTED PENDULUM SYSTEM (DQIP) USING A LINEAR QUADRATIC REGULATOR (LQR) CONTROLLER DEVELOPMENT OF THREE DEGREE OF FREEDOM CONTROLLER FOR SHELL AND TUBE HEAT EXCHANGER USING NON-DOMINATED SORTING GENETIC ALGORITHM II MODELLING OPTIMAL WATER RESOURCES ALLOCATION IN TIGA DAM INCORPORATION OF RELIABILITY INTO NIGERIAN EMPIRICAL MECHANISTIC PAVEMENT ANALYSIS AND DESIGN SYSTEM (NEMPADS) EFFECT OF ELAPSE TIME AFTER MIXING ON THE PROPERTIES OF STABILIZED LATERITE ASSESSMENT OF TRANSIENT STABILITY ENHANCEMENT CAPABILITY OF UNIFIED POWER FLOW CONTROLLER IN A MULTI-MACHINE POWER SYSTEM

click on whatsapp