Site Logo E-PROJECTTOPICS

DESIGN AND FABRICATION OF AIR SAMPLER IN AIR QUALITY ASSESSMENT FOR SELECTED HEAVY METALS

(A CASE STUDY OF KADUNA METROPOLIS)


📝


Presented To


Engineering Department

📄 Pages: 93       🧠 Words: 10391       📚 Chapters: 5 🗂️️ For: PROJECT

👁️‍🗨️️️ Views: 193      

⬇️ Download (Complete Report) Now!

ABSTRACT
Investigations were carried out for heavy metals composition of ambient air using a special instrument designed for this purpose. The lack of portable air sampler is a major obstacle to air pollution studies in Nigeria of recent. As a remedy to this, a simplified air sampler was designed and fabricated at the Water Resources and Environmental Engineering Department. Varied designs of this sampler were constructed and deployed for assessing the air quality of some selected heavy metals in some commercial areas in Kaduna metropolis such as Chechenia Market, Ahmadu Bello Way, Old and New Panteka. The instrument was mounted in strategic locations free from interference by humans and other natural factors. In accordance with standard methods, the trapped samples were washed in de-ionized water, diluted and digested and analyzed by Atomic Absorption Spectrometer (AAS) for the heavy metals zinc (Zn) lead (Pb) and iron (Fe). From the results Chechenia Market recorded mean values of Zn=1.55, Pb=0.00 and Fe=1.65 mg/l, Old Panteka recorded mean values of Zn= 0.13, Pb=0.00, Fe=4.29 mg/l and New Panteka recorded mean values of Zn=3.05, Pb=0.02, Fe=2.37 mg/l. These results were compared with national and international standards of National Environmental Standards and Regulations Enforcement Agency (NESREA) (2009) and the World Health Organization (WHO) (2011).Pb showed low mean values in the rainy season while the mean values obtained in the dry season were high. Zn and Fe maintained a fairly constant mean value though the values for Fe were high above recommended values of NESREA (2009)/WHO (2011).The results showed that Zn and Fe were above the permissible limits while Pb was within the permissible limit.The presence of these heavy metals in these areas maybe from numerous on-going human activities such as smelting of metals, vehicle exhaust, wearing of brake pads, tire abrasion, road dust and burning of refuse, among others. This investigation has highlighted that these heavy metals fractions exist in the air around these parts of Kaduna metropolis and they could be detrimental to human health. Further studies are recommended to determine the risks posed by these fractions and develop technological and management options for their reduction. Phasing out any remaining use of heavy metal additives should be encouraged.

PLEASE NOTE

This material is a comprehensive and well-written project, structured into Chapter (1 to 5) for clarity and depth.


To access the full material click the download button below


OR


Contact our support team via Call/WhatsApp: 09019904113 for further inquiries.

Thank you for choosing us!

📄 Pages: 93       🧠 Words: 10391       📚 Chapters: 5 🗂️️ For: PROJECT

👁️‍🗨️️️ Views: 193      

⬇️ Download (Complete Report) Now!

🔗 Related Topics

ECONOMIC EVALUATION OF PAVEMENT OVERLAY DESIGN STRATEGIES ENHANCING LIGHT-ENDS RECOVERY THROUGH JOINT ATMOSPHERIC DISTILLATION OF HEAVY CRUDE AND USED ENGINE OIL SYNTHESIS AND CHARACTERISATION OF REACTIVE DYES FROM QUINAZOLINONE DERIVATIVES AND THEIR COLOUR ASSESSMENT ON COTTON FABRIC ASSESSMENT OF THE IMPACT OF POWER OUTAGES ON COMMERCIAL CONSUMERS COLDROOMS CONSUMERS AT TRANS-AMADI AREA MODELING OF WATER QUALITY OF BINDARE STREAM IN ZARIA-NIGERIA USING MATLAB RELIABILITY ASSESSMENT OF THE STRENGTH CAPACITY OF SOLID TIMBER COLUMNS IN FRP LAMINATES AND SPRAYS EFFECT OF GASIFICATION OPERATING PARAMETERS ON QUALITY OF SYNGAS PRODUCED USING SAWDUST FEEDSTOCK OPTIMUM DESIGN OF REINFORCED CONCRETE RAFT FOUNDATIONS USING FINITE ELEMENT ANALYSIS ASSESSMENT OF THE PERFORMANCE OF WATER SUPPLY SERVICE IN KADUNA NORTH WATER WORKS RELIABILITY ANALYSIS OF OPTIMALLY DESIGNED REINFORCED CONCRETE FRAMES IN ACCORDANCE WITH EUROCODE 2 (2004) MODELLING THE PERFORMANCE OF SELECTED STATIONARY GRAIN THRESHERS EFFECT OF FAULTY DESIGN AND CONSTRUCTION ON BUILDING MAINTENANCE DESIGN,CONSTRUCTION AND EXPERIMENTAL EVALUATION OFTHEPRODUCTSOF A LOW COST BRIQUETTE MACHINE FOR RURAL COMMUNITIES IN NIGERIA DESIGN, SIMULATION, CONSTRUCTION AND PERFORMANCE EVALUATION OF A SOLAR BOX COOKER STUDIES OF DISINFECTION BY-PRODUCTS AND HEAVY METALS IN AHMADU BELLO UNIVERSITY DRINKING WATER SUPPLIES AND OPERATIONS OF SOME TREATMENT PLANTS SELECTED PHYSICAL AND MECHANICAL PROPERTIES OF COWPEA AS RELATED TO MECHANICAL THRESHING OF THE ENTIRE PLANT SHOOT MODIFICATION AND PERFORMANCE EVALUATION OF IAR GROUNDNUT SHELLER FOR SOME SELECTED VARIETIES OF PULSES DESIGN, CONSTRUCTION AND TESTING OF A CHARCOAL FIRED CRUCIBLE FURNACE FOR MELTING OF 10KG OF ALUMINIUM STUDIES ON TECHNOLOGICAL INTERVENTIONS TO UPGRADE SELECTED INDIGENEOUS FOOD PROCESSES DEVELOPMENT OF COOL STORAGE SYSTEM USING LOCALLY AVAILABLE MATERIALS FOR QUALITY PRESERVATION OF DRIED VEGETABLES

click on whatsapp