Site Logo E-PROJECTTOPICS

SHEAR RESISTANCE OF REINFORCED CONCRETE BEAM


📝


Presented To


Engineering Department

📄 Pages: 94       🧠 Words: 12388       📚 Chapters: 5 🗂️️ For: PROJECT

👁️‍🗨️️️ Views: 270      

⬇️ Download (Complete Report) Now!

ABSTRACT
The ordinary U-stirrups have always been used especially in beams as web reinforcement in most modern construction. As a probable substitute, here wire wesh of 3mm diameter is used to reinforce beams in shear. The investigation thus involves testing of beams reinforced in shear separately with the ordinary U-stirrups and with wire mesh. The beams are all the same with the only difference being in the web reinforcement. Apart from the mesh being easier to fabricate, the analysis of the results obtained shows that beam with the ordinary U-stirrups recorded more strains in the concrete than those with wire mesh. Moreover, crack control is better in the beams with mesh as their formation and propagation was more gradual leading to a gradual failure of the beams. However, it is recommended that a basic formular for calculating the theoritical shear resistance of beams involving mesh be deviced to include the influence of the horizontal members of the mesh on the shear resistance.

PLEASE NOTE

This material is a comprehensive and well-written project, structured into Chapter (1 to 5) for clarity and depth.


To access the full material click the download button below


OR


Contact our support team via Call/WhatsApp: 09019904113 for further inquiries.

Thank you for choosing us!

📄 Pages: 94       🧠 Words: 12388       📚 Chapters: 5 🗂️️ For: PROJECT

👁️‍🗨️️️ Views: 270      

⬇️ Download (Complete Report) Now!

🔗 Related Topics

COMPUTER-AIDED DESIGN OF REINFORCED CONCRETE SHALLOW FOUNDATIONS FOR FRAMED BUILDINGS APPLICATION OF FIBRE REINFORCED CONCRETE IN THE DESIGN AND CONSTRUCTION OF TENSION CONTROLLED STRUCTURES DETERMINATION OF THE SUITABILITY OF CASSAVA STARCH AS AN ADMIXTURE IN CEMENT PASTE AND CONCRETE STOCHASTIC SECTION MODULUS REQUIREMENT FOR CARBON FIBRE REINFORCED PLASTIC PULTRUDED BEAMS PROPERTIES OF STEEL FIBER MORTAR AND CONCRETE EVALUATION OF THESTRUCTURAL PERFORMANCE OF ASPHALTIC CONCRETE HIGHWAY PAVEMENT STRAIN-RATE INFLUENCE ON SHEAR STRENGTH CHARACTERISTICS OF COMPACTED FADAMA CLAY EFFECT OF PRE-AGEING THERMAL CONDITIONS ON THE HARDNESS, CORROSION RESISTANCE AND MICROSTRUCTURAL MORPHOLOGY OF ANTIMONY MODIFIED Al-Si-Mg ALLOY OPTIMUM DESIGN OF THE THICKNESS OF CARBON FIBRE REINFORCED POLYMER MATERIAL (CFRP) REQUIRED FOR STRENGTHENING OF DEFICIENT REINFORCED CONCRETE BEAM Unsymmetrically Reinforced Concrete Columns Under Small Eccentricity of Loading FAILURE COST ANALYSIS OF HUMAN ERRORS IN REINFORCED CONCRETE BEAM CONSTRUCTION PREDICTION OF MOMENT CAPACITY OF CONCRETE SLABS SINGLY REINFORCED WITH CARBON FIBER REINFORCED PLASTICS (CFRP) USING SIMULATED ANNEALING STUDIES ON THE PROPERTIES OF SHORT OKRA-GLASS FIBERS REINFORCED EPOXY HYBRID COMPOSITES STRENGTH PARAMETERS OF PIGMENTED CONCRETE RELIABILITY ANALYSIS OF PRESTRESSED ELECTRIC TRANSMISSION CONCRETE POLES A STUDY OF MODIFICATIONS OF FILLER DIMENSIONS AND THE EFFECT OF PHYSICAL AND MECHANICAL PROPERTIES OF PINEAPPLE LEAF FIBRE REINFORCED POLYPROPYLENE COMPOSITES RELIABILITY ANALYSIS OF OPTIMALLY DESIGNED REINFORCED CONCRETE FRAMES IN ACCORDANCE WITH EUROCODE 2 (2004) PROGRAM FOR ONE-WAY REINFORCED CONCRETE SLABS TO BS8110 (1985) STRESS DISTRIBUTION OF SHORT REINFORCED CONCRETE COLUMNS LOADED UNDER SMALL ECCENTRICITIES THE EFFECT OF CHROMIUM AND MANGANESE ON THE MECHANICAL PROPERTIES AND CORROSION RESISTANCE OF Al-Si-Fe ALLOY IN 0.5M HCl SOLUTION

click on whatsapp