Site Logo E-PROJECTTOPICS

TRANSMISSION AND ABSORPTION MEASUREMENTS OF HIGH ENERGY ELECTRONS WITH METALLIC AND INSULATING FOILS


📝


Presented To


Engineering Department

📄 Pages: 82       🧠 Words: 12786       📚 Chapters: 5 🗂️️ For: PROJECT

👁️‍🗨️️️ Views: 213      

⬇️ Download (Complete Report) Now!

ABSTRACT
The possible dependence of the extrapolated ranges of electrons on the detector characteristics has been investigated by two methods. These experiments were performed under well standardised geometrical conditions, employing electron beams (0.25 - 0.75 MeV) derived from a Van de Graaff electrostatic generator. The possible effects of poor geometry and small bias voltages on range values have also been investigated, but the results show that these effects could be kept very small in normal transmission measurements. The range values obtained in five metals (Be, Al, cu Ag and Au) and in four dielectrics (glass, mica, sulphur and polystyrene)by direct curre.it collection method and in Al, Ag and mica by an ionisation method, show that the latter method yields larger range values. A comparison with other results showed that the range value6 obtained with the Geiger counter are also greater than those obtained by the current collection method. The ionisation-in- depth results in Al showed good agreement with the other results, aid with Spencer's theory for equivalent source geometry. A universal transmission curve was obtained for each element using the true range vaLues calculated from the Bethe-Bloch stopping power formula, and its Intercept was found to be a smooth function of the atomic number for both metals and insulators, Electron bombardment conductivity has been studied primarily in sulphur and in selenium for comparison. Large current gains were observed in sulphur in confirmation of von Hippel's theory of the conductivity of the elements of Group VIb of the periodic table. The single crystals of sulphur showed as much bombardmenl conductivity as selenium, but much greater conductivity than the polycrystalline specimen, as was noted by Joffe(1928)and as would be expected for a more perfect crystal lattice. The dependierce of electron bombardment conductivity and the current distribution in bombarded dielectrics on the depth of penetration has been studied and the effects of spacecharge on these phenomena investigated and discussed.

PLEASE NOTE

This material is a comprehensive and well-written project, structured into Chapter (1 to 5) for clarity and depth.


To access the full material click the download button below


OR


Contact our support team via Call/WhatsApp: 09019904113 for further inquiries.

Thank you for choosing us!

📄 Pages: 82       🧠 Words: 12786       📚 Chapters: 5 🗂️️ For: PROJECT

👁️‍🗨️️️ Views: 213      

⬇️ Download (Complete Report) Now!

🔗 Related Topics

DEVELOPMENT OF AN IMPROVED DYNAMIC ALGORITHM TOENHANCE ENERGY SAVING IN LONG TERM EVOLUTION MOBILE ACCESS NETWORKS MODELLING OF ENERGY REQUIREMENT DEMAND FOR TILLAGE OPERATIONS IN MAIZE PRODUCTION THE FUNCTIONAL FORM AND ENERGY STABILITY OF TRAVEL EXPENDITURES IN NIGERIA EFFECTS OF ADDITIVES ON BIOGAS PRODUCTION FROM COW DUNG AND CHICKEN DROPPING MIXED WITH DIGITARIA SMUTS II STABILIZATION OF BLACK COTTON SOIL WITH LOCUST BEAN WASTE ASH DEVELOPMENT OF AN IMPROVED ERGODIC CAPACITY OF UNDERLAY COGNITIVE RADIO WITH IMPERFECT CHANNEL STATE INFORMATION DEVELOPMENT OF A DATA RATE-BASED SLEEP MODE ALGORITHM FOR ENERGY SAVINGS IN AN LTE HETEROGENEOUS NETWORK FOR A PICO eNodeB CELL DEVELOPMENT AND CHARACTERIZATION OF RECYCLED HIGH DENSITY POLYETHYLENE (RHDPE)/NATURAL FIBRE COMPOSITES DEVELOPMENT OF AN IMPROVED CULTURAL ARTIFICIAL FISH SWARM ALGORITHM WITH CROSSOVER CONSTRUCTION OF A ZIRCON- CEMENT PAD AND CALIBRATION OF PORTABLE SURVEY METERS FOR ENVIRONMENTAL RADIATION MEASUREMENTS NON-CIRCULAR BORING ON THE LATHE USING CHAIN DRIVE FOR POWER TRANSMISSION DEVELOPMENT OF A MODIFIED ENERGY-EFFICIENT CLUSTERING WITH SPLITTING AND MERGING FOR WIRELESS SENSOR NETWORKS USING CLUSTER-HEAD HANDOVER MECHANISM FAILURE ANALYSIS AND DEVELOPMENT OF HIGH WEAR RESISTANT LOCALLY- MANUFACTURED GOLD - MILL GRINDING PLATES THE STUDY OF HARDENING CHARACTERISTICS OF HIGH CARBON STEELS AND DUCTILE CAST IRON RELIABILITY ANALYSIS OF HIGH VOLTAGE POWER EQUIPMENT IN AJAOKUTA STEEL COMPANY LIMITED (ASCL) DEVELOPMENT OF A MULTIVARIATE HIGH- ORDER FUZZY TIME SERIES FORECASTING MODEL WITH DATA CLUSTERING FOR OPTIMUM PREDICTION AND CONTROL OF HANDOVER-BASED MOBILITY MANAGEMENT DEVELOPMENT OF A MODIFIED TOKEN BASED CONGESTION CONTROL SCHEME WITH ADAPTIVE FORWARDING FOR OPPORTUNISTIC NETWORK COMPARATIVE STUDY OF BIOGAS PRODUCTION FROM COW DUNG, CHICKEN DROPPINGS AND CYMBOPOGON CITRATUS AS ALTERNATIVE ENERGY SOURCES ENERGY DISSIPATION LOSSES IN DIFFERENT GEOMETRIES OF STEPPED SPILLWAY RELIABILITY-BASED ANALYSIS OF COMPOSITE SOLID SLENDER TIMBER COLUMNS WITH ALUMINIUM LAMINATES USING SELECTED NIGERIAN TIMBER SPECIES

click on whatsapp