Site Logo E-PROJECTTOPICS

ILLUMINATION DESIGN AND SIMULATION FOR OUTDOOR SPORTING ARENAS


📝


Presented To


Engineering Department

📄 Pages: 81       🧠 Words: 7910       📚 Chapters: 5 🗂️️ For: PROJECT

👁️‍🗨️️️ Views: 255      

⬇️ Download (Complete Report) Now!

ABSTRACT
Widespread demand for sporting activities in the night has led to the integration of lighting design in the development of sporting arenas due mainly to lower temperatures at night, increase in demand for sporting facilities and leisure considerations. Illumination of sporting arenas is essentially based on floodlighting. In this thesis the design procedures, calculations and factors for floodlighting were applied to a football field and the best aiming points to achieve the most uniform illumination using Monte Carlo Analysis programmed in MATLAB. A more uniformly illuminated field, would have less glare, but the more uniformly designed illumination was checked whether it would lead to less energy consumption and hence reduction in project cost. The illumination which was simulated by the Pointby- Point equation derived in algebraic form with adjustments for light intensity changes had the result depicted in Isolux contours. The contours showed visually that the Monte Carlo Analysis result was satisfactory and a further visual display of the uniformity gradient showed that the result at the best aiming point had the highest uniformity gradient of 0.027 Lux/m compared to other points that gave 0.021 Lux/m, while the field with random aiming points even gave a negative gradient of -0.001 Lux/m. As a field is a mirror image about its width and lengthwise centres, the result in the quadrant of study was applied to give the final illumination and isolux of the whole field. Further work could extend the study to other types of arenas and compare results with practical measurements using goniometer and photometer.

PLEASE NOTE

This material is a comprehensive and well-written project, structured into Chapter (1 to 5) for clarity and depth.


To access the full material click the download button below


OR


Contact our support team via Call/WhatsApp: 09019904113 for further inquiries.

Thank you for choosing us!

📄 Pages: 81       🧠 Words: 7910       📚 Chapters: 5 🗂️️ For: PROJECT

👁️‍🗨️️️ Views: 255      

⬇️ Download (Complete Report) Now!

🔗 Related Topics

EFFECT OF FAULTY DESIGN AND CONSTRUCTION ON BUILDING MAINTENANCE DESIGN, CONSTRUCTION AND TESTING OF AN IMPROVED CASTING POURING LADLE DESIGN, CONSTRUCTION AND TESTING OF A FLUIDISED BED COMBUSTION BOILER FOR ENERGY PRODUCTION MODELLING AND SIMULATION OF BIODIESEL BLENDS PERFORMANCE IN COMPRESSION IGNITION ENGINES MODELLING AND SIMULATION OF AMMONIA-WATER SEPARATION FOR APPLICATION IN ABSORPTION HEAT PUMP OPTIMUM PERFORMANCE OF A BATTERY OF WELLS USING A CCMPUTER SIMULATION MODEL DESIGN AND USE OF A MODEL CONSTRUCTED HORIZONTAL SUBSURFACE FLOW WETLAND FOR TREATING TANNERY WASTEWATER BY MEANS OF AQUATIC PLANTS DESIGN, CONSTRUCTION AND PERFORMANCE EVALUATION OF A LIQUIFIED PETROLEUM GAS INCUBATOR DESIGN OF WATER SUPPLY (COLD AND HOT) SYSTEM OF A THREE BEDROOM BUNGALOW WITH ADEQUATE PRESSURE Computer Simulation of the Telephone System in the Northern States of Nigeria DESIGN, CONSTRUCTION AND PERFORMANCE EVALUATION OF A FIXED BED PYROLYSIS SYSTEM DESIGN, CONSTRUCTION AND PERFORMANCE EVALUATION OF AN AXIAL-FLOW MILLET THRESHER DESIGN AND CONSTRUCTION OF A STARTER MECHANISE FOR APPLICATION IN A TWO-STROKE ENGINE DESIGN, SIMULATION, CONSTRUCTION AND PERFORMANCE EVALUATION OF A SOLAR BOX COOKER Design Construction, Simulation and Testing of a 300W Wind Powered Battery Charger RELIABILITY-BASED DESIGN RULES FOR THIN-WALLED STRUCTURAL STEEL BEAM-COLUMN ELEMENTS DESIGN, CONSTRUCTION AND TESTING OF A ZEOLITE-WATER SOLAR ADSORPTION REFRIGERATOR CHARACTERIZATION OF SOKOTO PHOSPHATE ROCK AND DESIGN OF PROCESS FLOWSHEET FOR ITS BENEFICIATION DEVELOPMENT OF TRANSITIONAL PROBABILITY MATRIX MODEL FOR PAVEMENT DESIGN DESIGN, CONSTRUCTION AND TEST OF A PASSIVE SOLAR TRACKING DEVICE

click on whatsapp