Site Logo E-PROJECTTOPICS

DEVELOPMENT OF A DYNAMIC OUTPUT-FEEDBACK REGULATOR FOR STABILIZATION AND TRACKING OF NON-SQUARE MULTI-INPUT MULTI-OUTPUT SYSTEMS


πŸ“


Presented To


Engineering Department

πŸ“„ Pages: 95       🧠 Words: 11324       πŸ“š Chapters: 5 πŸ—‚οΈοΈ For: PROJECT

πŸ‘οΈβ€πŸ—¨οΈοΈοΈ Views: 182      

⬇️ Download (Complete Report) Now!

ABSTRACT
This research work is aimed at the development of an observer-based dynamic output feedback controller for stabilization and tracking of nonlinear systems. The developed controller is designed after the immersion-invariance and internal model principle (IMP) frameworks and targets non-square systems such as rotational-translational actuator (RTAC), cart-driven inverted pendulum (CIP) and quadrotor unmanned aerial vehicle (UAV). However non-square multiple-input multiple-output (MIMO) systems such as the UAV represented the principal system of choice for their structural properties. Non-square MIMO systems are systems that have more inputs than outputs (over-actuated) or vice-versa (under-actuated) and reflect the structures of many real world systems. The developed immersion invariance error feedback control law(IIEFCL) is used to solve stabilization and robust tracking problems of non-square MIMO non-linear systems. The output feedback internal model based observer is developed and tested with the RTAC, CIP and UAV while the immersion invariance stabilizing controller is developed and tested on the RTAC system. The output feedback controller showed good stability response on the selected models while the immersion invariance method displayed a good transient phase stability and tracking results with the addition of a robust state feedback feature to the underlying controller. The obtained settling times for the output feedback stabilization results were 2.7s, 1.113s and 0.6435s respectively for the three systems. The immersion-invariance control law acting as a robustifier to another controller produced zero percent overshoot and tracking error. The results showed attainment of desired stability and tracking and also quick convergence, disturbance rejection and handling of transient oscillations such as finite time escape or transient instability phenomena, from which many nonlinear systems do not recover after they occur. The IIEFCL was developed for the Quadrotor UAV and the results obtained were compared with some other standard nonlinear controllers that have been used in QUAV control. The metric for comparison was the integral of the squared control input (ISCI) signal. Results obtained compared favourably with existing nonlinear control laws. The IIEFCL showed the most improvement of 92.92% improvement over the backstepping conviii trol law, it had a 72.92% improvement over the feedback linearization control law and the least improvement was with respect to the sliding mode control law where only 66.225% improvement was recorded. Simulations were made using Matlab/Simulink and embedded C++ tools.

PLEASE NOTE

This material is a comprehensive and well-written project, structured into Chapter (1 to 5) for clarity and depth.


To access the full material click the download button below


OR


Contact our support team via Call/WhatsApp: 09019904113 for further inquiries.

Thank you for choosing us!

πŸ“„ Pages: 95       🧠 Words: 11324       πŸ“š Chapters: 5 πŸ—‚οΈοΈ For: PROJECT

πŸ‘οΈβ€πŸ—¨οΈοΈοΈ Views: 182      

⬇️ Download (Complete Report) Now!

πŸ”— Related Topics

DESIGN AND DEVELOPMENT OF AN OPTIMIZED FLUXGATE MAGNETOMETER FOR IMPROVED EARTH’S MAGNETIC FIELD STUDIES MATHEMATICAL MODELING AND DYNAMIC SIMULATION OF TEMPERATURE DISTRIBUTION IN A CHAMBER FURNACE Development of EN 338(2003) Strength Classes of Doka (Isoberlinia doka), Madaci (Khaya senegalensis) Gawo (Acacia albida) and Rimi (Ceiba pentandra) Timber Species of Nigerian Origin DEVELOPMENT OF CHITOSAN-RICE HUSK ASH COMPOSITE ADSORBENT FOR REMOVAL OF CRUDE OIL FROM CONTAMINATED WATER STABILIZATION OF BLACK COTTON SOIL WITH LOCUST BEAN WASTE ASH DEVELOPMENT OF MULTICAST ALGORITHM FOR THE DETERMINATION OF MINIMUM COST OF BANDWIDTH OVER CODED PACKET WIRELESS NETWORK DEVELOPMENT OF SHEET STEEL GROUNDCOAT ENAMEL FROM LOCAL RAW MATERIALS DYNAMIC MODEL DEVELOPMENT AND RECEDING HORIZON CONTROL OF BLOOD GLUCOSE CONCENTRATION ANALYSIS AND OPTIMISATION OF INTER CELL HANDOVER DYNAMICS IN A GSM NETWORK DEVELOPMENT OF A FUZZY TIME SERIES MODEL USING CAT SWARM OPTIMIZATION CLUSTERING AND OPTIMIZED WEIGHTS OF FUZZY RELATIONS THE DEVELOPMENT OF Al-5%Cu/GRAPHITE PARTICULATE COMPOSITES FOR ENGINEERING APPLICATIONS DEVELOPMENT OF ENHANCED DIFFERENTIATED SERVICES MODEL OF CAMPUS INTERNET NETWORK: A CASE STUDY OF AHMADU BELLO UNIVERSITY, ZARIA MODELING, SIMULATION AND STABILIZATION OF A DOUBLE QUAD INVERTED PENDULUM SYSTEM (DQIP) USING A LINEAR QUADRATIC REGULATOR (LQR) CONTROLLER DEVELOPMENT OF A MODIFIED FRUIT FLY OPTIMIZATION ALGORITHM BASED LINEAR QUADRATIC REGULATOR CONTROLLER FOR AIRCRAFT PITCH CONTROL SYSTEM DEVELOPMENT OF CATALYST SUPPORT MATERIAL FROM PINDIGA BENTONITIC CLAY DEVELOPMENT AND PERFORMANCE EVALUATION OF AN AGITATED QUENCHING TANK/BATH DEVELOPMENT OF A MODIFIED ARTIFICIAL FISH SWARM ALGORITHM PARTIAL TRANSMIT SEQUENCE TECHNIQUE FOR PEAK TO AVERAGE POWER RATIO REDUCTION IN ORTHOGONAL FREQUENCY DIVISION MULTIPLEXING DEVELOPMENT OF A PILOT ALLOCATION PROTOCOL TO MITIGATE THE EFFECT OF PILOT CONTAMINATION IN MASSIVE MULTIPLE INPUT MULTIPLE OUTPUT SYSTEM DEVELOPMENT AND CHARACTERIZATION OF BIOCOMPOSITES FROM POLYLACTIC ACID AND GROUNDNUT SHELL ASH NANOPARTICLES DEVELOPMENT OF A DISCRETE-FIREFLY ALGORITHM BASED FEATURE SELECTION SCHEME FOR IMPROVED FACE RECOGNITION

click on whatsapp