Site Logo E-PROJECTTOPICS

CORROSION INHIBITION OF DOUBLE THERMALLY-AGED HIGH PRESSURE DIE CAST (SSM-HPDC) Al-Si-Mg ALLOY BY NEEM SEED AND GUAVA LEAF EXTRACTS


📝


Presented To


Engineering Department

📄 Pages: 80       🧠 Words: 6928       📚 Chapters: 5 🗂️️ For: PROJECT

👁️‍🗨️️️ Views: 383      

⬇️ Download (Complete Report) Now!

ABSTRACT
This study determined the corrosive effect of seawater on as-received and double thermally-aged Al-Si-Mg alloy. It also determined the functional groups present in guava leaf and neem seed extracts and their inhibitive effect on the corrosion of Al-Si-Mg alloy in seawater. This was with a view to enhancing their performance in the aggressive seawater environment. The study involved Fourier transform infrared (FTIR) analysis of the extracts, thermal ageing treatment, hardness measurement, gravimetric based-mass loss test, potentiodynamic polarization test and microstructural examination. The FTIR analysis results showed that the extracts can serve as good corrosion inhibitors due to the presence of aromatic compound and functional group with lone pair of electrons which makes them easily adsorb on surface of the alloy. The thermal ageing treatment employed was Double Thermal Ageing (DTAT) with temper condition at pre-ageing temperature of 105oC at constant time of 2 hrs. The hardness of Al-Si-Mg (SSM-HPDC) alloy was determined using the Rockwell-F scale hardness tester. The hardness value of the alloy increased from 59.1 HRF (as-received sample) to 82.8 HRF (double thermally aged sample) indicating an increase of 40%. Improvement in hardness can be attributed to fine coherent clusters of precipitates which serve as obstacles to dislocation movement. The gravimetric based-mass loss test was carried out at different inhibitor concentrations, time and temperature ranges of 0.1-0.5% v/v, 1-5 hrs and 30-70oC, respectively. From the results obtained the corrosion rate of both the as-received and age-hardened samples decrease with increase in inhibitor concentrations. The maximum inhibition efficiencies of 63.17% and 72.10% were obtained for the as-received and age-hardened samples, respectively, in the presence of guava leaf extract. While in the presence of neem seed extract maximum inhibition efficiencies of 60.49% and 64.26% were obtained for the as-received and age-hardened samples, respectively. The vii mechanism of inhibition was elucidated by kinetic and thermodynamic models. The polarization curves showed that the extracts act as mixed-type inhibitors. Results obtained from the potentiodynamic polarization technique indicate higher potential value for guava (Psidium guajava) leaf extract and lower potential value for neem (Azadirachta indica) seed extract. The Tafel plot showed an increase in polarization resistance (Rp) and lower corrosion current density (jcorr) for inhibited samples as compared with uninhibited samples. From the results, IE of 90.48% and 98.88% was obtained for as-received and age-hardened samples respectively in the presence of guava (Psidium guajava) leaf extract. While in the presence of neem seed extract IE of 96.55% and 80.68% were obtained for the as-received and age-hardened samples respectively. The two methods used for the corrosion evaluation were in agreement and a mixed type corrosion inhibition exist which obeys the Langmuir adsorption isotherms. From OPM result, the microstructure of the age-hardened sample showed finer grains and enhanced grain boundaries than the as-received sample. This was as a result of increase in volume of precipitated intermetallic compounds during ageing process and also refinement of precipitated constituent particles. The surface morphology of as-corroded samples was assessed with scanning electron microscope. Results showed severe damage and pits formation for as-corroded uninhibited condition than as-corroded inhibited condition.

PLEASE NOTE

This material is a comprehensive and well-written project, structured into Chapter (1 to 5) for clarity and depth.


To access the full material click the download button below


OR


Contact our support team via Call/WhatsApp: 09019904113 for further inquiries.

Thank you for choosing us!

📄 Pages: 80       🧠 Words: 6928       📚 Chapters: 5 🗂️️ For: PROJECT

👁️‍🗨️️️ Views: 383      

⬇️ Download (Complete Report) Now!

🔗 Related Topics

DEVELOPMENT AND CHARACTERIZATION OF Al-3.7%Cu-1.4%Mg ALLOY/PERIWINKLE ASH (Turritella communis) PARTICULATE COMPOSITES EVALUATION OF HOT- BITUMEN BATH AS A QUENCHING MEDIUM FOR AUSTEMPERING OF STEEL AND DUCTILE CAST IRON DEVELOPMENT AND APPLICATION OF DROUGHT FORECASTING MODELS FOR NIGERIA SUDANO SAHELIAN REGION POTENTIAL-ENHANCEMENT OF DEGRADED ENGINE OIL FOR FRICTION REDUCTION IN COLD UPSET FORGING OF ALUMINIUM ALLOYS THE EFFECT OF VANADIUM AND MOLYBDENUM ADDITIONS ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF DUCTILE CAST IRON DEVELOPMENT OF MULTICAST ALGORITHM FOR THE DETERMINATION OF MINIMUM COST OF BANDWIDTH OVER CODED PACKET WIRELESS NETWORK EFFECT OF DATE SEED POWDER FILLER ON PROPERTIES OF HIGH-DENSITY POLYETHYLENE PLANT EXTRACT-NANOPARTICLES HYBRID AS CORROSION INHIBITORS FOR AA2024 ALUMINIUM ALLOY PRODUCTION OF HIGH GRADE SODIUM SILICATE AND SILICA SOL FROM KANKARA KAOLIN FOR ZSM-5 SYNTHESIS INVESTIGATING THE SYNERGISTIC EFFECTS OF MORINGA OLEIFERA SEED CAKE EXTRACT AND OPUNTIA STRICTA (CACTUS) MUCILAGE IN SURFACE WATER TREATMENT EFFECTS OF Ni ADDITIONS ON THE MECHANICAL PROPERTIES AND CORROSION RESISTANCE OF Al-Cu-Si ALLOY DEVELOPMENT AND PERFORMANCE EVALUATION OF A FOUR ROW ANIMAL DRAWN MAIZE SEED PRECISION PLANTER MODELING, SIMULATION AND STABILIZATION OF A DOUBLE QUAD INVERTED PENDULUM SYSTEM (DQIP) USING A LINEAR QUADRATIC REGULATOR (LQR) CONTROLLER DEVELOPMENT OF A MULTIVARIATE HIGH- ORDER FUZZY TIME SERIES FORECASTING MODEL WITH DATA CLUSTERING FOR OPTIMUM PREDICTION AND CONTROL OF HANDOVER-BASED MOBILITY MANAGEMENT RELIABILITY ANALYSIS OF HIGH VOLTAGE POWER EQUIPMENT IN AJAOKUTA STEEL COMPANY LIMITED (ASCL) COMPARATIVE ANALYSIS OF THE AMINOLYSIS OF POLYETHYLENE TEREPHTHALATE WASTE AND SODIUM DICHROMATE AS CORROSION INHIBITORS FOR MILD STEEL IN 0.5M HCL AND 0.5M H2SO4 EFFECTS OF SOME BITUMEN COATING TREATMENTS ON THE CORROSION AND MECHANICAL BEHAVIOUR OF LOW CARBON STEEL A STUDY OF MODIFICATIONS OF FILLER DIMENSIONS AND THE EFFECT OF PHYSICAL AND MECHANICAL PROPERTIES OF PINEAPPLE LEAF FIBRE REINFORCED POLYPROPYLENE COMPOSITES INVESTIGATION OF CORROSION INHIBITION OF GUAVA, BANANA AND ALMOND PLANT EXTRACT IN 0.5M OF HCl AND H2SO4 SOLUTION ON LOW CARBON STEEL ASSESSMENT OF OIL EXTRACTS FROM TIGER NUT(Cyperus esculentus), WATER MELON (Citrullus vulgaris) and NEEM SEEDS (Azadirachta indica) AS CUTTING FLUIDS IN DRILLING OPERATION OF MILD STEEL

click on whatsapp