Site Logo E-PROJECTTOPICS

DESIGN AND CONSTRUCTION OF SOUND DETECTOR WITH ALARM SYSTEM


By


NWADNUMA BENJAMIN U EE/H2003/106



Presented To


Electrical/Electronic Engineering Department

πŸ“„ Pages: 36       🧠 Words: 4013       πŸ“š Chapters: 5 πŸ—‚οΈοΈ For: PROJECT

πŸ‘οΈβ€πŸ—¨οΈοΈοΈ Views: 347      

⬇️ Download (Complete Report) Now!

ABSTRACT

This project is design and construction of a sound detector with alarm system was done primarily to detector sound. It can be use in industrial and domestics. It employ four discreet stages with power supply which power the system. 
The 1st block is pick up amplifier containing the microphone and the input which serve as a transformer which the function is to pick up the smallest sound that comes close to the amplifier 
The second block is comparator with hysterias. The function as analogue to digital convector and also it help to accumulate amparm sound like sound of the gun short or any other heavy sound  
Block three. This is transistor switching this stage consist three bipolar function transistor (BJI) with a decay circuit found using capacitor time constant (T Ò€" RC) with a 12v Re let, it output work function is to switch the alarm circuit.
Block four. This is the Alarm circuit, itÒ€s function is the alarm tone. It is an stable mutivibertor that produce 1kH2 tone frequencies which sound as alarm signal with loud speaker which serves as an output transformer.

TABLE OF CONTENT

Title page
Approval page
Dedication
Acknowledgement
Abstract
Table of contents

CHAPTER ONE
INTRODUCTION
1.1 General description of project
1.2 Design objectives
1.3 Significance of the project
1.4 The report layout

CHAPTER TOW
LITERATURE REVIEW
2.1 Historical background of the project
2.2 Theories and models relevant to the design
2.3 List and description of the system component
2.4 Distinction between the existing method of design and the new approach.

CHAPTER THREE
SYSTEM DESIGN
3.1 Description of the system building blocks
3.2 System design specification
3.3 Block diagram of the system
3.4 Description of the overall operation of the system
3.5 Component list
3.6 Complete circuit diagram of sound detector with alarm system.

CHAPTER FOUR
Implementation testing and results

CHAPTER FIVE
Cost analysis conclusion and recommendation
REFERENCE.


πŸ“„ Pages: 36       🧠 Words: 4013       πŸ“š Chapters: 5 πŸ—‚οΈοΈ For: PROJECT

πŸ‘οΈβ€πŸ—¨οΈοΈοΈ Views: 347      

⬇️ Download (Complete Report) Now!

πŸ”— Related Topics

DESIGN AND CONSTRUCTION OF FIRE ALARM SYSTEM IN A TWO STOREY BUILDING DESIGN AND CONSTRUCTION OF POWER AMPLIFIER DESIGN AND CONSTRUCTION OF 25AMPS SINGLE PHASE AUTOMATIC CHANGE OVER DESIGN AND CONSTRUCTION OF 2KW SOLAR PANEL INVERTER DESIGN AND CONSTRUCTION OF AN INTRUDER DETECTOR FOR OFFICE AND HOME USE AUTOMATIC ROOM LIGHT CONTROLLER WITH VISITOR COUNTER DESIGN AND CONSTRUCTION OF A 60 WATTS POWER AMPLIFIER CONSTRUCTION OF AN INTRUDER ALARM SYSTEM DESIGN AND CONSTRUCTION OF A CHARGING SYSTEM USING BOTH SOLAR ENERGY INVENTION IN NIGERIA DESIGN AND CONSTRUCTION OF A MULTIPERPOSE SECURITY SYSTEM WITH ALARM AND DISPLAY THE DESIGN AND CONSTRUCTION OF CAR CONTROLLER USING TELEMETRY SYSTEM DESIGN AND CONSTRUCTION OF 45W AUDIO POWER AMPLIFIER THE DESIGN AND CONSTRUCTION OF ELECTRIC ARC WELDING MACHINE DESIGN AND IMPLEMENTATION OF BURGLAR ALARM SYSTEM CONSTRUCTION OF AUTOMATIC CHANGE OVER SWITCH INTERNENT OF THINGS (IOT) BASED SMART AGRICULTURE MONITORING SYSTEM FOR ENHANCED PRODUCTIVITY DESIGN AND CONSTRUCTION OF AN AUDIO AMPLIFIER DESIGN AND CONSTRUCTION A SOLAR POWERED MOBILE PHONE CHARGER DESIGN AND CONSTRUCTION OF A VEHICLE TRACKING AND ACCIDENT ALERT SYSTEM USING GPS AND GSM MODULE THE DESIGN OF A 500 WATTS UNINTERRUPTIBLE POWER SUPPLY WITH VOLTAGE LOW INDICATOR [INVERTER]

click on whatsapp