Site Logo E-PROJECTTOPICS

CONSTRUCTION OF AN INTRUDER ALARM SYSTEM


By


NWUBUOKA JUDE. E EE/N2003/081



Presented To


Electrical/Electronic Engineering Department

📄 Pages: 45       🧠 Words: 5647       📚 Chapters: 6 🗂️️ For: PROJECT

👁️‍🗨️️️ Views: 284      

⬇️ Download (Complete Report) Now!

ABSTRACT

The intruder alarm system was designed and build in order to let the industrial and commercial company know how important alarm system is all about. These can be of Good help if the intruder will look through this project and support for the development of this project as to let the Federal Government know that the young engineering of today can produce (construct) things that will help the economic and growth in developing this country is technology 
The intruder alarm system uses electric component to achieve the alarm sound, these components are integrated circuit (ICI,) Register, capacitors and speaker which when combined together it give an alarm system that can be used in houses, industry and commercial company. And how it can be operated. This project does a long way to give evidence and show that it can be use in the economic in favour of electronics and its usefulness in our present life days. WE suggest that this our project should be looked into by the school administration to see the possibilities of producing this alarm system in a commercial has been made by so doing we will help encourage our nations policy indigenous technology 

TABLE OF CONTENTS
Title Page
 Approval Page
Dedication
Acknowledgement
 Abstract 
Table of Contents 

CHAPTER ONE
1.1 Introduction

CHAPTER TWO
2.1 Block Diagram Circuit Implementation of Proposal Intruder Alarm Unit
2.2 Power Supply Section (Alternating Current)
2.3 Rectification
2.4 Regulated Power Supply

CHAPTER THREE
3.1 Application of 555 Timing Circuit
3.2 Monostable or One Short and Astable Mode
3.3 Alarm Section
3.4 Application 
3.5 Audio Amplifier
1.6 Amplifier Coupling
1.7 Amplifier Section
Complete Circuit

CHAPTER FOUR
4.1 Loved Speaker
4.2 Basic Moving Coil Loved Speaker

CHAPTER FIVE
5.1 Construction of an Intruder Alarm System
5.2 System Construction
5.3 Function of the Component
5.4 Operation of the System

CHAPTER SIX
6.1 Recommendation/Conclusion
6.2 Conclusion
6.3 Reference.

📄 Pages: 45       🧠 Words: 5647       📚 Chapters: 6 🗂️️ For: PROJECT

👁️‍🗨️️️ Views: 284      

⬇️ Download (Complete Report) Now!

🔗 Related Topics

THE DESIGN AND CONSTRUCTION OF CAR CONTROLLER USING TELEMETRY SYSTEM THE DESIGN AND CONSTRUCTION OF A DC TO AC POWER INVERTER INCORPORATED WITH AN AUTOMATIC SWITCH OVER BATTERY CHARGER THE DESIGN AND CONSTRUCTION OF AN INVERTER THE DESIGN AND CONSTRUCTION OF MINI RADIO BROADCAST TRANSMITTER AND AUDIO CONSOLE USING FREQUENCY MODULATION (FM) WITH POWER RATING OF 1 WATT DESIGN AND CONSTRUCTION A SOLAR POWERED MOBILE PHONE CHARGER CONSTRUCTION OF AUTOMATIC CHANGE OVER SWITCH CONSTRUCTION OF AN AUTOMATIC CHANGE OVER SWITCH (3.7KVA) INTERNENT OF THINGS (IOT) BASED SMART AGRICULTURE MONITORING SYSTEM FOR ENHANCED PRODUCTIVITY DESIGN AND CONSTRUCTION OF POWER AMPLIFIER AN INTELLIGENT LEAD ACID BATTERY MANAGEMENT SYSTEM FOR SOLAR AND OFF-PEAK ENERGY STORAGE DESIGN AND CONSTRUCTION OF AN AUTOMATIC PHASE SELECTOR DESIGN AND IMPLEMENTATION OF MICROCONTROLLER BASED DTMF MULTIPLE DEVICES REMOTE CONTROL SYSTEM DESIGN AND CONSTRUCTION OF SOUND DETECTOR WITH ALARM SYSTEM DESIGN AND CONSTRUCTION OF A SINGLE PHASE AUTOMATIC CHANGE OVER SWITCH WITH PHASE SELECTOR DESIGN AND CONSTRUCTION OF 25AMPS SINGLE PHASE AUTOMATIC CHANGE OVER DESIGN AND CONSTRUCTION OF VOLTAGE INVERTER SYSTEM WITH TRICKLE CHARGING SYSTEM DESIGN AND CONSTRUCTION OF A TRANSMITTER DESIGN AND CONSTRUCTION OF A SINGLE PHASE AUTO-TRANSFORMER OF RATING IKVA, 240V/110, 80 12V, 6V DESIGN AND CONSTRUCTION OF A VEHICLE TRACKING AND ACCIDENT ALERT SYSTEM USING GPS AND GSM MODULE THE DESIGN AND CONSTRUCTION OF A 40 WATT HI-FI AMPLIFIER

click on whatsapp