Site Logo E-PROJECTTOPICS

DEVELOPMENT OF BAOBAB/SISAL REINFORCED LOW DENSITY POLYETHYLENE HYBRID COMPOSITE


📝


Presented To


Engineering Department

📄 Pages: 99       🧠 Words: 12801       📚 Chapters: 5 🗂️️ For: PROJECT

👁️‍🗨️️️ Views: 203      

⬇️ Download (Complete Report) Now!

ABSTRACT
In this work, the properties of baobab/sisal fibre reinforced low density polyethylene hybrid composites were studied. The effect of fibre loading and fibre treatment with varying sodium hydroxide (NaOH)concentration on the composite properties was investigated. The developed composites were characterized for tensile strength, modulus of elasticity (MOE), elongation at break, hardness and impact strength.Analysis of the results showed that, for the monolithic composite,10 wt% baobab fibre loading had the bestmechanical property compared to other baobab fibre loadings, with tensile strength and MOEof 8.28 MPa and 127 MParespectively.The result ofNaOH treatment showed that 8 wt% treated fibre composite exhibited the best tensile strength, MOE, impact strength and the least percentage water absorption of 14.54 MPa, 245 MPa, 4.4 J/mm2 and 1.8% respectively.On hybridization with sisal, it was observed that the100% sisal fibre composite exhibited higher tensile strength and MOEof 12.47 MPa, 262.85 MPa, and the least percentage water absorption capacity of 0.37% but for both the hybrid were higher than the monolithic composite. The result of the NaOH treated hybrid composite showed that 6 wt% NaOH treated sisal/baobab fibre exhibited the best tensile strength, MOE and percentage water absorption of 17.08 MPa, 279.40 MPa, and 0.18% respectively which were higher than that of the monolithic sisal fibre reinforced composites. The fourier transforms infrared spectroscopy (FT-IR) analysis of untreated and treated baobab fibre showed that there was reduction in the hemicelluloses in the NaOH treated baobab fibres as indicated by the band at2277-2274 cm-1representing C=O stretching of hemicelluloses. The scanning electron microscope (SEM) analysis showed that composite produced from untreated fibre had more cracks and voids, possibly due topoor interaction between the fibre and low density polyethylene matrix, resulting in lower mechanical properties.The composite have properties whichsuggest their suitability for application in deck boards, dash board, rear seat barriers and guardrails systemsto replace the hardwood and metals currently used hence, preserving the environment.

PLEASE NOTE

This material is a comprehensive and well-written project, structured into Chapter (1 to 5) for clarity and depth.


To access the full material click the download button below


OR


Contact our support team via Call/WhatsApp: 09019904113 for further inquiries.

Thank you for choosing us!

📄 Pages: 99       🧠 Words: 12801       📚 Chapters: 5 🗂️️ For: PROJECT

👁️‍🗨️️️ Views: 203      

⬇️ Download (Complete Report) Now!

🔗 Related Topics

DEVELOPMENT OF AN OPTIMIZED ROUTING SCHEME FOR A CAPACITATED VEHICLE MODEL DEVELOPMENT OF A FUZZIFIED-TREND MAPPING AND IDENTIFICATION (FTMI) MODEL FOR FUZZY TIME SERIES FORECASTING DEVELOPMENT OF A PROCESS ROUTE FOR THE BENEFICIATION OF MALLAM AYUBA MANGANESE DEPOSIT TO FERROMANGANESE FEED GRADE OPTIMUM DESIGN OF THE THICKNESS OF CARBON FIBRE REINFORCED POLYMER MATERIAL (CFRP) REQUIRED FOR STRENGTHENING OF DEFICIENT REINFORCED CONCRETE BEAM DEVELOPMENT OF CATALYST SUPPORT MATERIAL FROM PINDIGA BENTONITIC CLAY A STUDY OF THE DEVELOPMENT, CHARACTERISATION AND DEGRADABILITY OF POLYESTER/NANO-LOCUST BEAN PODS ASH COMPOSITE STUDIES ON THE PROPERTIES OF SHORT OKRA-GLASS FIBERS REINFORCED EPOXY HYBRID COMPOSITES DEVELOPMENT OF A DISTRIBUTED BIG DATA FUSION ARCHITECTURE FOR MACHINE-TO-MACHINE COMMUNICATION USING ENSEMBLE LEARNING DEVELOPMENT AND PERFORMANCE EVALUATION OF HYDRAULIC PISTON PRESS BIOMASS HOLLOW BRIQUETTE MAKING MACHINE DEVELOPMENT OF A DYNAMIC OUTPUT-FEEDBACK REGULATOR FOR STABILIZATION AND TRACKING OF NON-SQUARE MULTI-INPUT MULTI-OUTPUT SYSTEMS DEVELOPMENT AND CHARACTERIZATION OF GLASS CERAMIC FROM COCA-COLA GLASS BOTTLE AND MAGNESITE DEVELOPMENT OF A SENSITIVITY INDEX BASED TECHNIQUE FOR UNIFIED POWER FLOW CONTROLLER PLACEMENT WITH CONTINGENCY ANALYSIS ON NIGERIA 330kV TRANSMISSION NETWORK OPTIMUM DESIGN OF REINFORCED CONCRETE RAFT FOUNDATIONS USING FINITE ELEMENT ANALYSIS DEVELOPMENT OF AN IMPROVED DYNAMIC ALGORITHM TOENHANCE ENERGY SAVING IN LONG TERM EVOLUTION MOBILE ACCESS NETWORKS DEVELOPMENT OF AN IMPROVED INTRUSION DETECTION BASED SECURED ROBUST HEADER COMPRESSION TECHNIQUE STOCHASTIC EVALUATION OF OFFSHORE CARBON FIBRE REINFORCED CONCRETE PLATFORMS ON ALUMINUM GIRDERS Development of EN 338(2003) Strength Classes of Doka (Isoberlinia doka), Madaci (Khaya senegalensis) Gawo (Acacia albida) and Rimi (Ceiba pentandra) Timber Species of Nigerian Origin DEVELOPMENT OF A SMELL AGENT OPTIMIZATION ALGORITHM FOR COMBINATORIAL OPTIMIZATION PROBLEMS DEVELOPMENT OF A SHUNT ACTIVE POWER FILTER FOR HARMONIC REDUCTION USING SYNCHRONOUS REFERENCE FRAME WITH SPACE VECTOR PULSE WIDTH MODULATION PROCESS DEVELOPMENT AND EQUIPMENT DESIGN FOR DEXTRIN MANUFACTURE FROM STARCH

click on whatsapp