Site Logo E-PROJECTTOPICS

DESIGN AND CONSTRUCTION OF A 3 WAY INTER-COMMUNICATION SYSTEM


By


AMUGO UGOCHUKWU. C EE/H2003/067



Presented To


Electrical/Electronic Engineering Department

📄 Pages: 46       🧠 Words: 5433       📚 Chapters: 6 🗂️️ For: PROJECT

👁️‍🗨️️️ Views: 332      

⬇️ Download (Complete Report) Now!

ABSTRACT

An intercommunication system is nothing but the communication between two or more persons not close to one another. This does not mean we should categorize telephones, fax, teleprinters, telegraphs etc. an example of intercom system sine they are used in communication between people. Infact, intercom involves short distance places. It is limited in electronics, offices, and hospitals. 
The intercom system under is a three way station type. This means that a person can communicate to the other at another station at his own convenient time. They call once another attention by the use of the tone generated by the use of tone generator.
Depress a button and the tone sounds, and the same switch is thrown to the intercom circuit thus they communicate.
This system to be used in solving the problem of poor communication in our department. Besides, it can be extended to some other offices by the addition this one may use a rotary switch

TABLE OF CONTENT

Title page
Certification
Dedication
Acknowledgement
Abstract
Table of contents

CHAPTER ONE
1.0 INTRODUCTION


CHAPTER TWO
Complete Circuit Description
2.0 Simplified block diagram of thee 3-way intercom system
2.1 Operation Principles

CHAPTER THREE
3.0 ICC1212C
3.1 Resistor 
3.2 Capacitor 
3.3 Condenser Microphone
3.4 Loudspeakers
3.5 Switches
3.6 Communication cables

CHAPTER FOUR
CIRCUITRY DESIGN AND DESCRIPTION 
4.0 Description of Power Supply Unit Circuit
4.1 Description of the tone Generator Circuit
4.2 Circuit Diagram of the Three Units and Explanation
4.3 Explanation of the Switching Circuit
 
CHAPTER FIVE
CONSTRUCTION AND PACKAGING 
5.0 Component Sourcing
5.1 Construction and Testing 
5.2 Audio Amplifying Stage
5.3 Prototype
5.4 Trouble shooting
5.5 Packaging
 
CHAPTER SIX
6.0 CONCLUSION
6.1 Further study and Design
 REFERENCE
APPENDIX

📄 Pages: 46       🧠 Words: 5433       📚 Chapters: 6 🗂️️ For: PROJECT

👁️‍🗨️️️ Views: 332      

⬇️ Download (Complete Report) Now!

🔗 Related Topics

DESIGN AND CONSTRUCTION OF A SINGLE PHASE AUTO-TRANSFORMER OF RATING IKVA, 240V/110, 80 12V, 6V DESIGN AND CONSTRUCTION OF 45W AUDIO POWER AMPLIFIER DESIGN AND CONSTRUCTION OF DIGITAL INCUBATOR THE DESIGN AND CONSTRUCTION OF A 40 WATT HI-FI AMPLIFIER INTERNENT OF THINGS (IOT) BASED SMART AGRICULTURE MONITORING SYSTEM FOR ENHANCED PRODUCTIVITY CONSTRUCTION OF AUTOMATIC CHANGE OVER SWITCH DESIGN AND CONSTRUCTION OF A VEHICLE TRACKING AND ACCIDENT ALERT SYSTEM USING GPS AND GSM MODULE DESIGN AND CONSTRUCTION OF AN AUTOMATIC PHASE SELECTOR DESIGN AND CONSTRUCTION OF 2KW SOLAR PANEL INVERTER DESIGN AND CONSTRUCTION OF A 60 WATTS POWER AMPLIFIER DESIGN AND CONSTRUCTION OF AN AUTOMATIC VOLTAGE STABILIZER CONSTRUCTION OF AN AUTOMATIC CHANGE OVER SWITCH (3.7KVA) CONSTRUCTION OF 4600mAh POWER BANK DESIGN AND CONSTRUCTION OF UNINTERRUPTIBLE POWER SUPPLY DESIGN AND CONSTRUCTION OF A METAL DETECTOR CONSTRUCTION OF AN INTRUDER ALARM SYSTEM CONSTRUCTION OF 200W UNINTERRUPTIBLE POWER SUPPLY DESIGN AND CONSTRUCTION OF A MULTIPERPOSE SECURITY SYSTEM WITH ALARM AND DISPLAY THE DESIGN AND CONSTRUCTION OF AN INVERTER Wireless Power Transfer system : Development and Implementation

click on whatsapp