Site Logo E-PROJECTTOPICS

DESIGN AND CONSTRUCTION OF AN AUTOMATIC PHASE SELECTOR


By


EZEMA OLIVER U. EE/H2003/001



Presented To


Electrical/Electronic Engineering Department

📄 Pages: 58       🧠 Words: 6674       📚 Chapters: 5 🗂️️ For: PROJECT

👁️‍🗨️️️ Views: 254      

⬇️ Download (Complete Report) Now!

ABSTRACT

This is a technical report presented on the design and construction of an Automatic Phase Selector.
In the construction work, an ordinary level knowledge of electronics principles are observed. We aimed at presenting a practical aspect of the subject and then providing the argument necessary for a thorough understanding. The reliability of the specimen was estimated after construction and testing to ensure steady state stability. The work is organized into five chapters.
Chapter one introduced the subject matter. Chapter two explores the literature review of the related works. Chapter three contains a detailed account of the design work while chapter four closely attempted an analysis of the design work. Chapter five draws the curtain by concluding the work.

TABLE OF CONTENT

Tile page
Approval page
Certification page
Dedication
Acknowledgement
Abstract
Table of content

CHAPTER ONE
1.0 Introduction
1.1 Aims/Objectives of the project
1.2 Significance of the study
1.3 Methodology

CHAPTER TWO
2.1 A review of Automatic Phase Selector
2.2 Power Supply Unit
2.3 The Transformer
2.4 The Rectifier
2.5 The Filter
2.6 The Voltage Regulator
2.7 Power Circuit
2.8 The Relays

CHAPTER THREE
3.0 The Design Proper
3.1 The Power Supply
3.2 The Step down Block
3.3 The Rectifier Block
3.4 The smoothing Block
3.5 The Regulator
3.6 The Current Sink

CHAPTER FOUR
4.0 Design Analysis
4.1 The Rectifier Circuit
4.2 The Filter Circuit
4.3 Design Calculation
4.4 The DC Voltage Regulator
4.5 The Voltage Programmable Voltage Sink

CHAPTER FIVE
5.0 Discussion of Result
5.1 Conclusion 
5.2 Recommendation 
References


📄 Pages: 58       🧠 Words: 6674       📚 Chapters: 5 🗂️️ For: PROJECT

👁️‍🗨️️️ Views: 254      

⬇️ Download (Complete Report) Now!

🔗 Related Topics

THE DESIGN AND CONSTRUCTION OF AN AUTOMATIC ALARM SYSTEM TO MONITOR THE WATER LEVEL DESIGN AND IMPLEMENTATION OF MICROCONTROLLER BASED DTMF MULTIPLE DEVICES REMOTE CONTROL SYSTEM THE DESIGN AND CONSTRUCTION OF A THREE PHASE AUTOMATIC PHASE SELECTOR DESIGN AND CONSTRUCTION OF POWER AMPLIFIER DESIGN AND CONSTRUCTION OF SOUND DETECTOR WITH ALARM SYSTEM THE DESIGN AND CONSTRUCTION OF A DC TO AC POWER INVERTER INCORPORATED WITH AN AUTOMATIC SWITCH OVER BATTERY CHARGER DESIGN AND CONSTRUCTION OF A SINGLE PHASE AUTOMATIC CHANGE OVER SWITCH WITH PHASE SELECTOR DESIGN AND CONSTRUCTION OF FIRE ALARM SYSTEM IN A TWO STOREY BUILDING THE DESIGN OF A 500 WATTS UNINTERRUPTIBLE POWER SUPPLY WITH VOLTAGE LOW INDICATOR [INVERTER] DESIGN AND CONSTRUCTION OF A CHARGING SYSTEM USING BOTH SOLAR ENERGY INVENTION IN NIGERIA DESIGN AND CONSTRUCTION OF AN AUDIO AMPLIFIER DESIGN AND CONSTRUCTION OF A TWO LANE TRAFFIC LIGHT DESIGN AND CONSTRUCTION OF BATTERY CHARGER DESIGN AND CONSTRUCTION OF AN AUTOMATIC VOLTAGE STABILIZER CONSTRUCTION OF 4600mAh POWER BANK CONSTRUCTION OF AUTOMATIC CHANGE OVER SWITCH THE DESIGN AND CONSTRUCTION OF MINI RADIO BROADCAST TRANSMITTER AND AUDIO CONSOLE USING FREQUENCY MODULATION (FM) WITH POWER RATING OF 1 WATT THE DESIGN AND CONSTRUCTION OF AN INVERTER DESIGN AND CONSTRUCTION OF DIGITAL INCUBATOR CONSTRUCTION OF AN AUTOMATIC CHANGE OVER SWITCH (3.7KVA)

click on whatsapp